Electrodes HYUNDAI 7018.G Ø3.2x350 (5,0KG) (Code: S-7018.G3.2)

Išparduota

Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 683 62 800 arba el. paštu irankiugamalt@gmail.com.

+ - Užduoti klausimą apie produktą Click to collapse

Elpaštas:This email address is being protected from spambots. You need JavaScript enabled to view it.

Tel.: +370 683 62800

Applications:

Structures using 490MPa class high tensile steel, such as bridges, building, rolling stock and machines.

Characteristic on usage:

S- 7018.G is an iron powder low hydrogen type electrode of high efficiency used for welding 490MPa class high tensile steel. Its usability is good with direct current applications as well as alternating current applications and easy to weld in all position.

Specification: JIS D5016; AWS/ASME A5.1/SFA5.1 E7018

Certificates: ABS, LR, KR, BV, DNV, GL, NK, CVB.

Note on usage:

Dry the electrodes at 300℃∼350℃ for 60 minutes before use.

2. Store the electrodes at 100~ 150℃ after drying for keeping them away from moisture.

3. Keep the arc as short as possible, and avoid large width weaving.

4. Adopt back step method or strike the arc on a small steel plate prepar - ed for this particular purpose to prevent blowholes at the arc starting.

5. Use the wind screen against strong wind.

Pack 5kg